Thetford 40538 SmartTotes Bedienungsanleitung Seite 1

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Thetford 40538 SmartTotes herunter. Thetford 40538 SmartTotes User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 3
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Before Beginning
4 Read all instructions com-
pletely.
4Wear protective gloves,
glasses, long sleeves, and
nose/face mask to avoid con-
tact with human waste.
4For hygienic reasons, rinse
tank and hose thoroughly.
SmartTote
®
AutoStop
TM
Level Gauge
Kit
Made in the USA
Thetford Corporation
Ann Arbor, MI 1-800-521-3032 www.thetford.com
F# 40620 2/07
Part No.
40531
1. Pull old lanyard from tank
body.
2. Turn old Level Gauge clock-
wise until two finger tabs line
up with “O”s on tank body. Lift
off old Level Gauge. Discard.
3. Line up and insert new Level
Gauge into tank. Turn counter-
clockwise until finger tabs line
up with “V”s on tank.
4. Connect lanyard on tank.
Holding Tank Accessories
Before Beginning
4 Read all instructions com-
pletely.
4Wear protective gloves,
glasses, long sleeves, and
nose/face mask to avoid con-
tact with human waste.
4For hygienic reasons, rinse
tank and hose thoroughly.
SmartTote
®
AutoStop
TM
Level Gauge
Kit
Made in the USA
Thetford Corporation
Ann Arbor, MI 1-800-521-3032 www.thetford.com
F# 40620 2/07
Part No.
40531
1. Pull old lanyard from tank
body.
2. Turn old Level Gauge clock-
wise until two finger tabs line
up with “O”s on tank body. Lift
off old Level Gauge. Discard.
3. Line up and insert new Level
Gauge into tank. Turn counter-
clockwise until finger tabs line
up with “V”s on tank.
4. Connect lanyard on tank.
Holding Tank Accessories
Seitenansicht 0
1 2 3

Inhaltsverzeichnis

Seite 1 - Wear protective gloves

Before Beginning4 Read all instructions com-pletely.4Wear protective gloves, glasses, long sleeves, and nose/face mask to avoid con-tact with human w

Seite 2 - Hose Support

1. Place tank on one side.2. Remove two screws from Skid Plate. Slide Skid Plate down and pop it off of Axle Assembly. Set Skid Plate and screws asi

Seite 3 - Assembly

1. Place tank on one side.2. Remove two screws from Skid Plate. Slide Skid Plate down and pop it off of Axle Assembly. Set Skid Plate and screws asi

Kommentare zu diesen Handbüchern

Keine Kommentare