Thetford 05223 Vent Kit Bedienungsanleitung PDF herunterladen

1. Remove Cap and Splash Guard from

Electra-Magic Main Housing Cover on the

side desired for the Vent Kit instillation.

2. Determine where the Vent Fitting will be

located and drill a 3/4-inch hole through the

deck (hull) at that point. Note: Tube routing

should not create sharp bends or traps.

3. Insert Vent Fitting through hole and tighten

down nut securely.

4. Cut Tubing to proper length and put over

barbed end of Vent Fitting. Move Clamp into

place over the barbed area.

5. Screw Flange tightly into the Hose Barb.

6. Place Gasket and Flange into the hole pro-

vided on the Electra Magic, noting locator pin

position, and screw securely into place.

7. Stretch Socket Filler over the hex body of

Hose Barb and work Socket Filler down

until it is ush with the top of Main Housing

Cover.

8. Put Tubing over Hose Barb and move Clamp

into place over the barbed area.

Thetford Corporation • P.O. Box 1285 • Ann Arbor, MI 48106

Form No. 05237 • Rev. 9/02

Installation Guide

Electra-Magic #05223 Vent Kit

Seite 1

1. Remove Cap and Splash Guard from Electra-Magic Main Housing Cover on the side desired for the Vent Kit instillation.2. Determine where the Vent F

Keine Kommentare

Thetford 05223 Vent Kit Bedienungsanleitung